聚碳酸酯PC，糙面磨光，薄膜，片材，热成型

 

Spartech PC PC-2000

聚碳酸酯

Spartech Plastics

 

Technical Data

 

产品说明

Spartech PC-2000 Sign Grade Polycarbonate.

For backlit sign faces demanding structural integrity in an economic package, PC-2000 is the material of choice. Specially formulated to provide maximum impact resistance, greatly superior forming and fabrication characteristics, and high heat resistance, PC-2000 is highly versatile in a wide variety of sign applications.

 

PC-2000 is available in flat sheet and reels in either smooth or matte finish. Sign white and other standard and custom colors are available upon request; we also maintain an extensive inventory in clear sheet and reels for immediate delivery.

 

Fabrication.PC-2000 can be drilled, routed, sawed, sheared, punched or die cut using the proper tools and techniques. High-speed carbide-tipped twist drills will give good results; drills must have sharp cutting edges to avoid "notching" the plastic. When shearing, use blades with a 45 degree angle or less. Most conventional mechanical fixing methods such as screws and rivets can be used; adhesive and solvent bonding are possible. For proper mechanical fastening, always over-drill the hole by 1/16 of an inch to allow for expansion. Use an approved silicone sealant in the hole with the fastener to inhibit stress cracking at the hole.

 

Cutting.PC-2000 can be cut with standard highspeed metal working tools; carbide-tipped blades are recommended for longer life. Circular saws with triple chip or beveled tooth type blades with about two teeth per inch are recommended, with blade speeds in the 6000 to 8000 rpm range. Band saws having 10 to 18 teeth per inch and blade speeds of 2500 to 3000 feet per minute should be adequate for smooth, clean cuts.

 

Cementing.Bonding PC-2000 to itself and to other plastics can be accomplished. Excellent results can be obtained with urethane adhesives including Hartel #17017 and Weld-On #55 by IPS. Silicones by GE Plastics are also recommended. Solvent cementing may also be used. (For more information, contact your sign distributor.)

 

Painting.PC-2000 can be easily painted and silkscreened using standard materials and techniques. Based on thorough testing by Spraylat and Akzo the following products are suggested. Follow the manufacturer's guidelines for proper painting and paint removal procedures. Always remove solvents from plastic sheet as quickly as possible to prevent solvent attack.

 

Pre-Drying.

The most critical step in the thermoforming process is proper drying of the sheet. The most efficient temperature is 250 F. Drying time is dependent upon oven configuration, air circulation, sheet thickness etc. See chart for suggested starting points. Note: Always remove protective film when drying sheet at over 200° F.

 

Thermoforming.

PC-2000 can be vacuum-formed on virtually all thermoforming equipment from highvolume multi-station rotary machines to single-station or shuttle presses; pressure forming techniques have also been highly successful. Excellent forming detail can usually be obtained at sheet temperatures of 350° - 425° F; all normal tooling materials such as aluminum, epoxy and various hardwoods can be used.

 

Optimum Weatherability.

For improved performance with PC-2000 in terms of long-term weatherability, use a firstsurface clear overspray before exposing to sunlight.

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet (English)

UL 黄卡 2 •  E139482-222844

搜索 UL 黄卡 •  Spartech Plastics

供货地区 • 北美洲

• 抗撞击性，高 • 可粘结性 • 适于粉刷

性能特点 • 可加工性，良好 • 耐气候影响性能良好

• 可切削 • 耐热性，高

用途 • 电子显示器

外观 • 白色 • 糙面磨光 • 可用颜色

形式 • 薄膜 • 片材

加工方法 • 热成型

 

物理性能 额定值单位制 测试方法

比重 1.20g/cm³ ASTM D792

机械性能 额定值单位制 测试方法

拉伸模量 2410MPa ASTM D638

抗张强度 (屈服) 64.5MPa ASTM D638

伸长率 (断裂) 100% ASTM D638

 

Spartech PC PC-2000

聚碳酸酯

Spartech Plastics

机械性能 额定值单位制 测试方法

弯曲模量 2700MPa ASTM D790

弯曲强度 103MPa ASTM D790

冲击性能 额定值单位制 测试方法

悬壁梁缺口冲击强度 (23°C) 920J/m ASTM D256

落锤冲击 4 (23°C, 4.50 mm) 108J ASTM D3029

硬度 额定值单位制 测试方法

洛氏硬度 (R 计秤) 118 ASTM D785

热性能 额定值单位制 测试方法

热变形温度 (1.8 MPa, 未退火) 132°C ASTM D648

线形膨胀系数 - 流动 0.000068cm/cm/°C ASTM D696

 

 

 

 

 

聚碳酸酯PC，PC Spartech PC PC-2000是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,REACH报告,SVHC报告,UL黄卡,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123  微信：13549213581   QQ：15397858 

13549213581 肖生